|
|
|
| |
GL-PMG-5000 Specification Sheet |
|
|
|
＃ Interface provided for extension and braking system
＃ Low start up speed due to low cogging and resistive torque design.
＃ Gearless, direct drive, low RPM generator.
＃ High standard, quality components for use in harsh and extreme environments for wind turbines.
＃ High efficiency and Low mechanical resistance energy loss.
＃ Generator is designed using specially selected material and treated to resist corrosion and oxidation.
＃ Designed for reliable and long operational lifetime under long-term full output.
＃ Designed for 20-year operation life.
＃ Patent protected design.
| * The above power curve is based on the generator with fixed load. The output value with variable load is higher. |
* The voltage values is the rectified DC values. |
| Model number: |
GL-PMG-5000 |
| Rated rotation speed: |
200 RPM |
| Rated output power: |
5kW |
| Shaft bearing: |
High standard NSK 6213VV |
| Weight: |
138Kgs |
| Rotor inertia (Kg.m2): |
0.138 |
| Fasteners (nuts and bolts): |
High standard Stainless Steel |
| Lamination stack: |
High specification cold-rolled Steel |
| Windings temperature rating: |
180 degrees Celsius |
| Magnet material: |
NdFeB (Neodymium Iron Boron) |
| Magnets temperature: |
rating 150 degrees Celsius |
| Generator configuration: |
3 Phase star connected AC output or rectifier DC output |
| Safety: |
Capable of withstand short term shorting of the windings for braking effect at rated rotation speed. Class 1 electrical safety rated for prevention of |
| Starting torque: |
< 3.2NM |
| Phase resistance: |
3.3 ohms |
|
|
|
|
