◆ Low start up speed due to low cogging and resistive torque design.
◆ Gearless, direct drive, low RPM generator.
◆ High standard, quality components for use in harsh and extreme environments for wind turbines.
◆ High efficiency and Low mechanical resistance energy loss.
◆ Excellent heat dissipation due to the Aluminium alloy outer frame and special internal structure.
◆ High strength from the specially design structure and fully heat treatment Aluminium.
◆ Generator is designed using specially selected material and treated to resist corrosion and oxidation.
◆ Designed for reliable and long operational lifetime under long-term full output.
◆ Designed for 20-year operation life.
◆ Patent protected design.

Power Curve	Unloaded Voltage

Outer Dimensions	Mounting Dimensions

Model number:	GL-PMG-1000
Outer frame material	High standard Aluminium alloy with TF/T6 heat treatment (TF/T6 full heat treatment for increasing the performance of aluminium alloy as follows. Heat 4-12 hours at 525-545 degrees Celsius, quench with hot water, and precipitation heat treatment for 8-12 hours at 155-175 degrees Celsius.)
Outer frame finish	Aluminium surface is anodised then power painted for anti-corrosion protection
Shaft material	High standard Stainless Steel
Shaft bearing	High standard SKF or NSK bearing
Weight	15.7Kg
Rotor inertia (Kg.m2):	0.010
Fasteners (nuts and bolts)	High standard Stainless Steel
Lamination stack	High specification cold-rolled Steel
Windings temperature rating	180 degrees Celsius
Magnet material	NdFeB (Neodymium Iron Boron)
Magnets temperature rating	150 degrees Celsius
Generator configuration	3 Phase star connected AC output
Safety	Capable of withstand short term shorting of the windings for braking effect at rated rotation speed. Class 1 electrical safety rated for prevention of electrical shocks.
Starting torque:	<0.5NM
Phase resistance:	6.0ohms
Download Brochure	Small Size (1.15 MB)	Big Size (2.00 MB)